Table we keep · CMS calculator
Cleat catalogue
publishedcms.table.cleatCatalogue
Every cleat the calculator can propose or be given, range by range, with the dimensions the arrangement and every drawing read.
Local graph
publishedestimateda choiceno sourceArrows: the way the data flows
The table we actually use
Two-Bolt LSF Nylon Cleats · 18
| Part | Cable Ø mm | Width mm | Height mm | Depth mm | Fixing centres mm | Bolts | State |
|---|---|---|---|---|---|---|---|
| 2LSF07 | 38–46 | 92.0 | 68 | 54.0 | 68 | M10 | |
| 2LSF08 | 46–51 | 103.0 | 76 | 54.0 | 79 | M10 | |
| 2LSF09 | 51–57 | 103.0 | 82 | 54.0 | 79 | M10 | |
| 2LSF10 | 57–64 | 103.0 | 89 | 54.0 | 79 | M10 | |
| 2LSF11 | 64–70 | 130.0 | 95 | 54.0 | 106 | M10 | |
| 2LSF1200 | 70–76 | 128.0 | 101 | 75.0 | 104 | M10 | |
| 2LSF1201 | 76–83 | 135.0 | 107 | 75.0 | 111 | M10 | |
| 2LSF1202 | 83–90 | 143.0 | 115 | 75.0 | 119 | M10 | |
| 2LSF131 | 90–97 | 165.0 | 122 | 100.0 | 138 | M12 | |
| 2LSF132 | 97–105 | 171.0 | 130 | 100.0 | 144 | M12 | |
| 2LSF141 | 105–112 | 178.0 | 137 | 100.0 | 151 | M12 | |
| 2LSF142 | 112–120 | 187.0 | 146 | 125.0 | 160 | M12 | |
| 2LSF151 | 120–128 | 196.0 | 156 | 125.0 | 168 | M12 | |
| 2LSF152 | 128–135 | 203.0 | 165 | 125.0 | 176 | M12 | |
| 2LSF161 | 135–144 | 222.0 | 177 | 150.0 | 190 | M16 | |
| 2LSF162 | 144–152 | 232.0 | 187 | 150.0 | 200 | M16 | |
| 2LSF171 | 152–160 | 242.0 | 198 | 150.0 | 210 | M16 | |
| 2LSF172 | 160–168 | 252.0 | 209 | 150.0 | 220 | M16 |
Single-Bolt LSF Nylon Cleats — not proposed · 10
| Part | Cable Ø mm | Width mm | Height mm | Depth mm | Fixing centres mm | Bolts | State |
|---|---|---|---|---|---|---|---|
| 1LSF10 | 10–13 | 37.8 | 27 | 41.4 | — | M10 | |
| 1LSF11 | 13–16 | 41.2 | 30 | 41.4 | — | M10 | |
| 1LSF12 | 16–19 | 44.3 | 33 | 41.4 | — | M10 | |
| 1LSF13 | 19–23 | 48.2 | 36 | 41.4 | — | M10 | |
| 1LSF14 | 23–27 | 52.2 | 40 | 41.4 | — | M10 | |
| 1LSF15 | 27–32 | 57.1 | 44 | 41.4 | — | M10 | |
| 1LSF16 | 32–38 | 63.1 | 49 | 41.4 | — | M10 | |
| 1LSF17 | 38–46 | 71.3 | 58 | 41.4 | — | M10 | |
| 1LSF18 | 46–51 | 77.3 | 67 | 41.4 | — | M10 | |
| 1LSF19 | 51–57 | 83.2 | 72 | 41.4 | — | M10 |
Two-Bolt Aluminium Cleats (2A) · 18
| Part | Cable Ø mm | Width mm | Height mm | Depth mm | Fixing centres mm | Bolts | State |
|---|---|---|---|---|---|---|---|
| 2A-07N | 38–46 | 94.0 | 57 | 49.0 | 68 | M10 | |
| 2A-08N | 46–51 | 104.0 | 60 | 49.0 | 79 | M10 | |
| 2A-09N | 51–57 | 105.0 | 68 | 49.0 | 79 | M10 | |
| 2A-10N | 57–64 | 105.0 | 76 | 49.0 | 79 | M10 | |
| 2A-11N | 64–70 | 133.0 | 80 | 64.0 | 106 | M10 | |
| 2A-1200N | 70–76 | 133.0 | 87 | 64.0 | 106 | M10 | |
| 2A-1201N | 76–83 | 133.0 | 95 | 64.0 | 106 | M10 | |
| 2A-1202N | 83–90 | 133.0 | 102 | 64.0 | 106 | M10 | |
| 2A-131N | 90–97 | 154.0 | 109 | 76.0 | 126 | M10 | |
| 2A-132N | 97–105 | 154.0 | 118 | 76.0 | 126 | M10 | |
| 2A-141N | 105–112 | 165.0 | 126 | 76.0 | 135 | M10 | |
| 2A-142N | 112–120 | 173.0 | 133 | 76.0 | 143 | M10 | |
| 2A-151N | 120–128 | 196.0 | 157 | 125.0 | 168 | M12 | |
| 2A-152N | 128–135 | 203.0 | 166 | 125.0 | 176 | M12 | |
| 2A-161N | 135–144 | 222.0 | 178 | 150.0 | 190 | M16 | |
| 2A-162N | 144–152 | 232.0 | 188 | 150.0 | 200 | M16 | |
| 2A-171N | 152–160 | 242.0 | 199 | 150.0 | 210 | M16 | |
| 2A-172N | 160–168 | 252.0 | 210 | 150.0 | 220 | M16 |
46 rows · read live from tools/cleats/products.js CLEAT_RANGES
How the calculator uses it
A cable's cleat is the smallest short-circuit-tested part whose printed range covers it — the smaller part of either range, the nylon one on a tie — unless you choose another in the schedule. The single-bolt range is never proposed (Sparkline's two-bolt rule). The widths set how the cleats sit across the rung (the no-clash rule); the heights and fixing centres set how they are drawn and where their bolts land (bolts in the slots).
Watch for
The two-bolt heights and bolts are the current data sheet's, not the older catalogue's.
Worked through on the owner’s ladder run — 4 × XLPE/SWA/LSOH 4c 95mm², cleated on every rung
| The size the engine chose | 600 mm wide |
|---|---|
| Its inside width | 596 mm |
| Usable, with 30 % kept clear | 417.2 mm |
| What the cleats and cables take | 368.0 mm |
| Verdict | PASS |
Computed by the calculator for this run when this page was generated — not typed.
VERIFY before issue
Cleat dimensions, fixing centres, weights, safe working loads and the technical-data blocks are transcribed from a two-page catalogue extract supplied by Sparkline, and that transcription has been checked against the source at legible resolution. What that does NOT establish is that they are the CURRENT figures: confirm against the published datasheet for the exact product and finish before an issued design relies on them.
cleatProducts.what — the calculator’s own words, not a copy
The sheet prints a height RANGE per size (the clamp closes down); the tool draws the larger figure.
cleatProducts.aluminium.heightNote — the calculator’s own words, not a copy
The linered version (L suffix, 3 mm liner) is not held.
cleatProducts.aluminium.liners — the calculator’s own words, not a copy
The extract carries the ELLIS logo in its page headers while the product text and footer read ETS Cable Components. Cited as it appears; the checker resolves it.
cleatProducts.attribution — the calculator’s own words, not a copy