Check · CMS calculator
Cleat bolts in the rung slots
estimatedcms.check.boltsInSlots
Whether each cleat's bolts land in the rung's slots, or on the metal between them.
Local graph
publishedestimateda choiceno sourceArrows: the way the data flows
How the calculator uses it
The rung editor shows every bolt in or out of its slot, and the calculation sheet lists them. A bolt on the metal needs its own hole in the rung — so the check is advisory, never a FAIL. A bolt wider than the slot can never go through one.
Worked through on the owner’s ladder run — 4 × XLPE/SWA/LSOH 4c 95mm², cleated on every rung — the rung editor before and after “Line up with slots”
| As laid | 0 of 4 cleats — 5 of the 8 bolts land on the metal between slots |
|---|---|
| Line up with slots moves each cleat | A1 +4 / +12 / +20 / +28 mm |
| After | 4 of 4 cleats — every bolt goes through a slot |
Computed by the calculator for this run when this page was generated — not typed.