Constant · CMS calculator
Rung and slot geometry
estimatedcms.constant.rungGeometry
The rung every cable and cleat stands on, and the slots its bolts go through.
Local graph
publishedestimateda choiceno sourceArrows: the way the data flows
The table we actually use
| What | Value | From | State |
|---|---|---|---|
| Rung pitch | 300 mm | catalogue pp.14–19 | |
| Rung section | 42 × 21 mm | catalogue p.37 | |
| Rung top above the rail’s underside | 31 mm | model files | |
| Slots | 35 × 11 mm at 50 mm centres | catalogue p.37 | |
| First slot from the rail | 7.5 mm | Sparkline’s assumption | ◐ estimated: not on the page — confirm with Legrand |
5 rows · 1 marked estimated (hover the mark for why) · read live from tools/cms-calc/geom.js LADDER_GEOM
How the calculator uses it
The rung's top is the datum of the drop; every cable and cleat is drawn standing on it; the slots are what the bolts check reads; the rung pitch — the catalogue's rung spacing between centres, printed on each family's lengths-and-fittings pages (pp.14–19) — is the step the cleat check rounds its spacing down to.
Watch for
Where the first slot sits from the rail is not on the catalogue page — it is Sparkline's assumption, marked estimated, until Legrand confirms it.
Worked through on the owner’s ladder run — 4 × XLPE/SWA/LSOH 4c 95mm², cleated on every rung — the rung editor before and after “Line up with slots”
| As laid | 0 of 4 cleats — 5 of the 8 bolts land on the metal between slots |
|---|---|
| Line up with slots moves each cleat | A1 +4 / +12 / +20 / +28 mm |
| After | 4 of 4 cleats — every bolt goes through a slot |
Computed by the calculator for this run when this page was generated — not typed.