Document · CMS calculator

Swifts IEC ladder model files

published

cms.doc.swiftsModelFiles

Legrand's SmartPlant vendor specification files for the Swifts IEC ladder — Topaz, Sapphire and Emerald, in each finish. They are the manufacturer's own model data, supplied by Sparkline, and they confirmed the rail heights, the radii and every fitting part number the calculator spells.

Local graph

Leans on · 0Leaned on by · 4NothingLadder widths and usable sections — transcribed into · inside widths, publishedLadder widths and usablesectionstranscribed into · inside widthsLadder bend fittings — transcribed into · radii and part kinds, publishedLadder bend fittingstranscribed into · radii and partkindsRung and slot geometry — transcribed into · rung top, estimatedRung and slot geometrytranscribed into · rung topLadder rail heights — transcribed into, publishedLadder rail heightstranscribed intoSwifts IEC laddermodel files Leans on · 0Leaned on by · 4NothingLadder widths and usable sections — transcribed into · inside widths, publishedLadder widths andusable sectionstranscribed into ·inside widthsLadder bend fittings — transcribed into · radii and part kinds, publishedLadder bendfittingstranscribed into ·radii and part kindsRung and slot geometry — transcribed into · rung top, estimatedRung and slotgeometrytranscribed into ·rung topLadder rail heights — transcribed into, publishedLadder rail heightstranscribed intoSwifts IEC laddermodel files Leans on · 0Leaned on by · 4NothingLadder widths and usable sections — transcribed into · inside widths, publishedLadder widthsand usablesectionstranscribed into ·inside widthsLadder bend fittings — transcribed into · radii and part kinds, publishedLadder bendfittingstranscribed into ·radii and partkindsRung and slot geometry — transcribed into · rung top, estimatedRung and slotgeometrytranscribed into ·rung topLadder rail heights — transcribed into, publishedLadder railheightstranscribed intoSwifts IEC ladder model files

publishedestimateda choiceno sourceArrows: the way the data flows

See it in the whole calculator

The original document

Publisher
Legrand
Title
SmartPlant vendor specification files, Swifts IEC cable ladder (Topaz, Sapphire, Emerald)
Edition
read 2026-09-20
Where in it
the rail heights, inside widths, radii and part kinds of each family
Do we hold it
Sparkline’s folder
May it be reproduced here
In small extracts, quoted with acknowledgement. The document is the authority.

How the calculator uses it

They give each family's outside and inside height — so where the rung sits up the rail (rail heights) — and the INSIDE width of every size, which is the nominal size less four millimetres (ladder sections). The bend fittings take their radii and part kinds from them.

Watch for

They hold no rung pitch, no rung section and no slot geometry; those come from the catalogue.