Document · CMS calculator
Cleat catalogue 001816-3
publishedcms.doc.ellisCatalogue
The ETS / Ellis catalogue extract for the nylon cleat ranges: the single-bolt range on p.50 and the two-bolt range on p.51, with each part's cable range, width, height, depth, fixing centres and fixing holes.
Local graph
publishedestimateda choiceno sourceArrows: the way the data flows
The original document
- Publisher
- ETS Cable Components / Ellis Patents
- Title
- Cleats for the Industrial Market — catalogue 001816-3
- Edition
- extract held
- Where in it
- p.50 single-bolt LSF nylon cleats; p.51 two-bolt LSF nylon cleats
- Do we hold it
- Sparkline’s extract
- May it be reproduced here
- In small extracts, quoted with acknowledgement. The document is the authority.
What the document says

How the calculator uses it
The cleat catalogue takes each two-bolt part's cable range, width, depth and fixing centres from it — what the arrangement and every drawing read.
Watch for
Two things on it have been superseded by the maker's current data sheet DS20E: every height is a few millimetres short, and the 1200, 1201 and 1202 parts are printed with M12 holes where the data sheet gives M10. Its short-circuit line gives a current with no spacing and no formation, so it is not a test the calculator can use; the single-bolt range is printed untested, which DS33E has since changed.
Where the sources disagree
- 2F+ two hole clamp — data sheet DS20E — superseded by: heights and bolts of the two-bolt range
- 1F clamps — data sheet DS33E — superseded by: the single-bolt range’s “untested”
VERIFY before issue
The extract carries the ELLIS logo in its page headers while the product text and footer read ETS Cable Components. Cited as it appears; the checker resolves it.
cleatProducts.attribution — the calculator’s own words, not a copy