Document · CMS calculator

1F clamps — data sheet DS33E

published

cms.doc.ellisDs33e

The Ellis data sheet for the 1F one-hole clamp. Its testing summary gives one short-circuit test for the LSF version, and none for the standard one.

Local graph

Leans on · 0Leaned on by · 1NothingCleat short-circuit declarations — transcribed into · p.2, publishedCleat short-circuitdeclarationstranscribed into · p.21F clamps — datasheet DS33E Leans on · 0Leaned on by · 1NothingCleat short-circuit declarations — transcribed into · p.2, publishedCleat short-circuitdeclarationstranscribed into · p.21F clamps —data sheetDS33E Leans on · 0Leaned on by · 1NothingCleat short-circuit declarations — transcribed into · p.2, publishedCleatshort-circuitdeclarationstranscribed into ·p.21F clamps — data sheet DS33E

publishedestimateda choiceno sourceArrows: the way the data flows

See it in the whole calculator

The original document

Publisher
Ellis Patents
Title
Data sheet DS33E “1F clamps”
Edition
issue 02, 06/08/19
Where in it
p.2 the testing summary
Do we hold it
downloaded from the maker
May it be reproduced here
In small extracts, quoted with acknowledgement. The document is the authority.

Ellis Patents — 1F one-hole clamp ↗ We are not the source of record.

What the document says

Ellis DS33E issue 02 p.2: the table head and the short-circuit row, 10.4 kA for the LSF version at 300 mm intervals; the B version not tested
Quoted extract — the single-bolt clamp’s one short-circuit test. From Ellis Patents, Data sheet DS33E “1F clamps”, issue 02, 06/08/19, p.2. © Ellis Patents; quoted with acknowledgement for criticism and review — only the part that shows what the calculator takes, never a whole table. The document is the authority.

How the calculator uses it

The declarations carry the test. The single-bolt range is still never proposed: Sparkline's rule is two-bolt cleats only (the cleat catalogue marks it).

Where the sources disagree