Document · CMS calculator
Installation — Cable Bending Radii
publishedcms.doc.prysmianBendingRadii
Prysmian's installation guide to cable bending radii: the minimum radius for LV and MV cable, and the advice to bend larger wherever possible. Its publisher restricts reproduction, so this page links to it and quotes nothing.
Local graph
publishedestimateda choiceno sourceArrows: the way the data flows
The original document
- Publisher
- Prysmian Group
- Title
- Prysmian Group — "Installation – Cable Bending Radii" (2022)
- Edition
- read 2026-09-20
- Where in it
- the minimum radii for LV and MV cable
- Do we hold it
- web PDF
- May it be reproduced here
- No — link only: its publisher restricts reproduction.
Prysmian — Installation, Cable Bending Radii (PDF) ↗ We are not the source of record.
How the calculator uses it
It is the cable maker's side of the bending radius basis: for armoured LV cable it gives eight times the diameter and notes that six times was previously allowed — so the six-times figure the cable table carries on many armoured sizes is the superseded one. It publishes no allowance for LV cable; the allowance options are derived from its MV figures.