Table we keep · CMS calculator

Duct bore areas

published

cms.table.ductBores

The bore of each duct, taken as a circle on its internal diameter.

Local graph

Leans on · 1Leaned on by · 1CMS capacity workbook — derived from · area = π/4 × bore², publishedCMS capacity workbookderived from · area = π/4 ×bore²Fill by area — feeds, publishedFill by areafeedsDuct bore areas Leans on · 1Leaned on by · 1CMS capacity workbook — derived from · area = π/4 × bore², publishedCMS capacityworkbookderived from · area =π/4 × bore²Fill by area — feeds, publishedFill by areafeedsDuct bore areas Leans on · 1Leaned on by · 1CMS capacity workbook — derived from · area = π/4 × bore², publishedCMS capacityworkbookderived from ·area = π/4 ×bore²Fill by area — feeds, publishedFill by areafeedsDuct bore areas

publishedestimateda choiceno sourceArrows: the way the data flows

See it in the whole calculator

The table we actually use

Polyduct · 3
Bore mmOutside Ø mmBore area mm²State
3237804.25
38441,134.11
50601,963.50
Twinwall · 10
Bore mmOutside Ø mmBore area mm²State
3140754.77
40501,256.64
50631,963.50
60752,827.43
71903,959.19
941106,939.78
1001187,853.98
12514812,271.85
14016015,393.80
15017817,671.46
Cubis Multiduct · 2
Bore mmOutside Ø mmBore area mm²State
Normal1108,836.00
XL16019,600.00
Ridgiduct Power · 5
Bore mmOutside Ø mmBore area mm²State
1001187,853.98
12514812,271.85
15017917,671.46
22526739,760.78
30035470,685.83
Naylor Metro · 5
Bore mmOutside Ø mmBore area mm²State
941106,939.78
1001207,853.98
12514512,271.85
13716014,741.14
15017817,671.46
Naylor MetroFlex · 6
Bore mmOutside Ø mmBore area mm²State
3240804.25
40501,256.64
50631,963.50
75904,417.86
941106,939.78
13716014,741.14

31 rows · read live from tools/cms-calc/ref-data.js DUCTS

How the calculator uses it

As for trunking, the bore area times the duct's space factor, less the future spare, is what the cables may fill (the area check).

Watch for

A duct that is not round inside has less room than its circle; confirm the true profile.

VERIFY before issue

Duct bore areas assume a circular bore = (pi/4)·ID². Confirm the true internal profile and usable area for the specified duct.

ductArea — the calculator’s own words, not a copy