Document · CMS calculator

BS 7671:2018+A4:2026

published

cms.doc.bs7671

The IET Wiring Regulations. Cited only — never reproduced here.

Local graph

Leans on · 0Leaned on by · 1NothingSegregation bands — names · 528.1, publishedSegregation bandsnames · 528.1BS7671:2018+A4:2026 Leans on · 0Leaned on by · 1NothingSegregation bands — names · 528.1, publishedSegregationbandsnames · 528.1BS 7671:2018+A4:2026 Leans on · 0Leaned on by · 1NothingSegregation bands — names · 528.1, publishedSegregationbandsnames · 528.1BS 7671:2018+A4:2026

publishedestimateda choiceno sourceArrows: the way the data flows

See it in the whole calculator

The original document

Publisher
The IET and BSI
Title
Requirements for Electrical Installations (the IET Wiring Regulations)
Edition
18th edition, Amendment 4 (2026)
Where in it
Reg 521.5.201 (cables must withstand the forces of a fault); 528.1 (segregation); Appendix 4 Tables 4C1 / 4C4 (grouping)
Do we hold it
Sparkline’s copy
May it be reproduced here
No. IET copyright — cited, never reproduced. Get it from the IET.

IET — BS 7671 ↗ We are not the source of record.

How the calculator uses it

Regulation 521.5.201 is why the cleat check exists: cables must withstand the electromechanical forces of a fault. Regulation 528.1 is behind the segregation bands, and the grouping factors of Appendix 4 behind the design check that reports one. The regulations require the withstand; they do not give a method — the method is the cleat standard's.