Document · CMS calculator

Swifts cable tray technical guide

published

cms.doc.swiftsTrayGuide

Legrand's Swifts cable tray technical guide says which tray depths are made at which width — on two pages, quoted below.

Local graph

Leans on · 0Leaned on by · 1NothingTray sizes — transcribed into · the 18 mm tray at 300 mm only, publishedTray sizestranscribed into · the 18 mmtray at 300 mm onlySwifts cable traytechnical guide Leans on · 0Leaned on by · 1NothingTray sizes — transcribed into · the 18 mm tray at 300 mm only, publishedTray sizestranscribed into · the18 mm tray at 300mm onlySwifts cable traytechnical guide Leans on · 0Leaned on by · 1NothingTray sizes — transcribed into · the 18 mm tray at 300 mm only, publishedTray sizestranscribed into ·the 18 mm tray at300 mm onlySwifts cable tray technical guide

publishedestimateda choiceno sourceArrows: the way the data flows

See it in the whole calculator

The original document

Publisher
Legrand
Title
Swifts® cable tray — technical guide
Edition
read 2026-10-07
Where in it
p.7 and p.15 — the tray depths
Do we hold it
web PDF
May it be reproduced here
In small extracts, quoted with acknowledgement. The document is the authority.

Legrand — Swifts cable tray technical guide (PDF) ↗ We are not the source of record.

What the document says

“Tray depth: 12 mm, 18 mm (for 300 mm width)”

Legrand, Swifts® cable tray — technical guide, p.7 — quoted.

“For 300 mm – 18 mm depth”

Legrand, Swifts® cable tray — technical guide, p.15 — quoted.

How the calculator uses it

The stainless light-duty 18 mm tray is offered at 300 mm only (tray sizes), and the size table says why.

Watch for

The same p.15 line suggests the 12 mm tray is not made at 300 mm either, which the workbook still offers. That has not been acted on.